Skip to content
Product Carbon Footprint
November 6, 2026
9 min read

How to Calculate a Product Carbon Footprint From Your GHG Inventory

By Morten Rosén, Co-founder & CEO, Future Fluent

PCF Calculation
Allocation
Cradle-to-Gate
GHG Inventory

You can calculate a screening product carbon footprint by taking your company's cradle-to-gate emissions for a year and dividing them over your products, by each product's share of total output mass or of revenue. The result is a footprint per unit, consistent across your range, built from data you already have.

Quick facts

  • The starting point is your company GHG inventory: Scope 1, Scope 2 and the upstream Scope 3 categories.
  • Downstream Scope 3 categories (9 to 12) never belong in a cradle-to-gate footprint.
  • Allocate by mass where you can. ISO 14044 prefers a physical relationship over an economic one.
  • Allocate by revenue when products differ so much that mass no longer reflects where the emissions come from.
  • The choice of key can move a product's footprint by a third or more. Always state it.
  • Register every product, or show the share of output your products cover. Unallocated emissions should be visible, not hidden.
  • Report biogenic CO2 separately and state the share of primary data.

Can you calculate a product carbon footprint from your company's GHG inventory?

Yes. A screening PCF takes the cradle-to-gate part of your annual GHG inventory and allocates it over the products you made that year. It does not model each product's production process, so it is less specific than a life cycle assessment, but it covers your whole range consistently and quickly.

The precondition is a usable inventory. If your Scope 1 and 2 are calculated and your main purchases are in Scope 3 category 1, you have what you need. If not, start there: GHG calculation for VS (VSME) reporting covers the company-level work, and the same figures feed both your company report and your product footprints.

Which emissions go into a cradle-to-gate footprint?

Everything up to your factory gate: Scope 1, Scope 2, and the upstream Scope 3 categories, such as purchased goods and services, fuel and energy related activities, upstream transport and waste from your operations. Downstream categories, from distribution to end of life, are outside a cradle-to-gate boundary.

Some upstream categories are judgement calls. The GHG Protocol Product Standard treats capital goods as non-attributable processes that may be excluded, and business travel and commuting are company activities rather than steps in making the product. Including them is defensible, and so is excluding them. What is not defensible is leaving the reader to guess, so list what you included.

Which scopes and Scope 3 categories belong inside a cradle-to-gate product carbon footprint
Scope or categoryIn a cradle-to-gate PCF?
Scope 1: fuel, process emissions, refrigerantsYes
Scope 2: purchased electricity and heatYes
Scope 3, cat. 1: purchased goods and servicesYes, usually the largest part
Scope 3, cat. 3, 4, 5: energy-related, inbound transport, wasteYes
Scope 3, cat. 2, 6, 7: capital goods, travel, commutingYour choice. State it
Scope 3, cat. 9 to 12: downstream transport, processing, use, end of lifeNo

Should you allocate by mass or by revenue?

By mass, where mass reflects how emissions arise. ISO 14044 sets an order of preference: avoid allocation where possible, then use a physical relationship such as mass, and only then an economic one such as revenue. Use revenue when your products differ so much that mass no longer tracks where the emissions come from.

Mass works well for a manufacturer whose products are made from similar materials in similar processes, because more material usually means more emissions. Revenue becomes the better choice when you make a small, high-value precision part alongside a heavy, simple one, and the precision part consumes far more machine time and energy per kilogram. Neither key is right in every case. Pick one, give the reason, and use it consistently.

What difference does the allocation key make?

A large one. In the illustrative example below, the same 1,200 tonnes of emissions give product A a footprint of 1.8 kg CO2e per unit under mass allocation and 1.2 kg under revenue allocation. Product B goes from 4.8 to 7.2 kg. Same inventory, same year, a different answer.

The example company had 1,200 t CO2e of cradle-to-gate emissions in the year and made two products, which together account for all of its output:

A worked example of mass allocation compared with revenue allocation for two products from the same annual inventory
Product AProduct BTotal
Units sold400,000100,000
Mass per unit1.5 kg4.0 kg
Total mass600,000 kg (60%)400,000 kg (40%)1,000,000 kg
Price per unit€4€24
Revenue€1.6m (40%)€2.4m (60%)€4.0m
Footprint, mass allocation1.8 kg CO2e / unit4.8 kg CO2e / unit1,200 t
Footprint, revenue allocation1.2 kg CO2e / unit7.2 kg CO2e / unit1,200 t

Under mass allocation, both products carry 1.2 kg CO2e per kilogram. Under revenue allocation, the expensive product B carries more than twice as much per kilogram as product A. If B really does consume more energy per kilogram, revenue is the more honest key. If it does not, revenue inflates B's footprint because of its price. That is why the key must be on the datasheet.

What if your products do not cover all of your output?

Then part of your emissions stays unallocated, and that should be visible. If you register only your main products, their combined share of total mass or turnover is less than 100 percent. Allocate on the true denominator, total output or total turnover, and report the uncovered remainder rather than spreading it over the products you listed.

Spreading it would quietly overstate every registered product. A footprint that shows "registered products carry 85 percent of output; 15 percent unallocated" is more trustworthy than one that seems complete because the gap was absorbed.

What does a screening footprint tell you, and what does it not?

It tells you each product's share of your real emissions, on one consistent method, and where your emissions concentrate across life-cycle stages. It does not tell you how one product's production process differs from another's, because every product shares the company's average intensity per kilogram or per euro.

That limit is also how you improve it. Replace average spend-based factors for your largest materials with supplier-specific figures, which go straight into Scope 3 category 1. Move from spend to activity data where you can. Each improvement raises your primary data share, which is the measure customers increasingly look at. The difference between the two data types is explained in spend-based versus activity-based emissions.

What should go on the datasheet?

The footprint per declared unit, the boundary, the reporting year, the allocation key and why it was chosen, the categories included, the share of primary data, biogenic CO2 separately, and any unallocated share. With those, your customer can use the figure correctly and compare it with next year's.

Future Fluent's product footprint feature runs this calculation from your GHG inventory. You register products with volume, unit price and optionally mass, choose the allocation key and the categories in the boundary, and get a footprint per unit with a breakdown by life-cycle stage. Each calculation is saved as a version, and the datasheet can be downloaded as a PDF or shared by link. What each customer will accept is covered in screening PCF, ISO 14067 or EPD, and the bigger picture in the product carbon footprint guide for manufacturers.

See which plan includes product carbon footprints →

Frequently asked questions

What data do I need to calculate a screening PCF?
Your company's GHG inventory for the year, the products you made with their annual volumes, and either each product's mass or its unit price, plus total output mass or turnover.

Is mass or revenue allocation more accurate?
Mass is preferred under ISO 14044 where it reflects how emissions arise. Revenue is a fallback for products that differ too much for mass to be meaningful.

Should business travel be included in a product footprint?
It is a judgement call. It is a company activity rather than a production step. Either choice is defensible if you state it.

How often should I recalculate?
Once a year, after your GHG inventory for the year is complete. Keep the method the same so the figures are comparable over time.